Reports within 24 hours · Get your free instant quote
Guide · Minnesota

Radon Testing Guide for Minnesota

Why Minnesota is a high-radon state, how testing works, and what mitigation involves.

Why Minnesota is a high-radon state, how testing works, and what mitigation involves. This guide is written for Minnesota homes by Closer Look Inspectors.

Minnesota's radon risk

Radon is a colorless, odorless radioactive gas, and the Minnesota Department of Health reports the average radon level in Minnesota is more than three times the U.S. level — and more than two in five Minnesota homes have radon levels that pose a significant health risk. Long-term exposure raises health risk, which is why testing is strongly recommended at purchase.

How testing works

We place an EPA-protocol continuous monitor on the lowest livable level under closed-house conditions for a minimum of 48 hours, then deliver the reading with your report. It is objective, documented, and useful in negotiation.

If radon is high

Most homes mitigate effectively with a professionally installed sub-slab depressurization system that vents soil gas above the roofline. Elevated results are a solvable problem, not a deal-killer.

Quick checklist

  • Minnesota is a high-radon state
  • Test on the lowest livable level
  • 48-hour minimum, closed-house
  • Mitigation is effective and routine

Build your free instant quote online in about a minute. You get a thorough on-site inspection, and a photo-mapped report within 24 hours.

Get Your Free Instant Quote
Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote