Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Mold & Moisture Inspection · Imogene, IA

Mold & Moisture Inspection in Imogene

Mold & Moisture Inspection in Imogene, IA by Closer Look Inspectors. A photo-mapped digital report within 24 hours.

Get Your Free Instant QuoteSee What's Included
Imogene · Fremont County

Mold & Moisture Inspection in Imogene

Mold & Moisture Inspection in Imogene, Fremont County, by Closer Look Inspectors. Imogene is a very small Fremont County city of about 0.49 square miles that once had a railroad depot, and we calibrate every visit to that.

A mold and moisture inspection — mold testing and mold detection in one visit — pairs infrared moisture mapping with lab-backed sampling to locate active moisture and trace it to its source — a frequent issue in Iowa basements and older housing stock.

Imogene homes are inspected by a local partner in our Iowa network.  ·  Call or text (563) 517-7815

Modern white farmhouse-style home with black windows and dark garage doors — Mold & Moisture Inspection in Imogene, IAImogene
Calibrated

Tuned to Imogene.

Imogene housing runs to houses from the years around the town's 1910 peak of 341 residents, with a thin mix of postwar and newer homes since the population fell through the later 1900s, across the compact townsite of about half a square mile and the farm ground and acreages around it, on loess-mantled hills of the Southern Iowa Drift Plain in Fremont County — and that mix shapes what a mold & moisture inspection here needs to find. Instrument-grade tools, a local eye, every visit.

Local conditions in Imogene

No Iowa law requires a home inspection before a sale — the one mandatory time-of-transfer inspection covers private septic systems (Iowa Code 455B.172) — which makes an independent inspection the only thorough, buyer-side read on an Imogene home. Imogene sits in Fremont County, and every Iowa county is EPA Radon Zone 1. Iowa HHS reports Iowa has the largest percentage of homes above the 4.0 pCi/L action level of any state — 71.6 percent in the Iowa Radon Survey — and the Iowa seller disclosure form asks for any known radon test results. Finished basements concentrate it, and only a 48-hour test gives you this home's number. Iowa leaves frost depth to the local building code rather than one statewide number, and the annual freeze-thaw cycle drives the settlement cracks and ice-dam wear we calibrate every Imogene visit to find.

See all Imogene inspections →  ·  More about mold & moisture inspection →

Questions

Common questions.

How do you test for mold?
Infrared imaging and moisture meters pinpoint wet areas; when the evidence warrants it, samples go to an accredited laboratory.
What drives moisture problems here?
Grading and downspout discharge, below-grade humidity, and the occasional plumbing or roof leak.
Imogene has only a few dozen residents. How do I tell whether a house is on city sewer or its own septic system?
Ask the seller and confirm it in writing, because in a town this small you should not assume either way. We look for a cleanout, a lid or a riser in the yard, the plumbing exit point in the basement or crawl space, and whether there is a well or rural water meter. If the property has its own septic system, Iowa requires an inspection of it before the property transfers under Iowa Code 455B.172, so the system's location, age and pump-out history matter early. We also check roof runoff and grade around the foundation. Fremont County is EPA Radon Zone 1, so a radon test belongs in the basement review.
Keep looking

More across Iowa.

Mold & Moisture Inspection nearby

Other inspections in Imogene

Questions about mold & moisture inspection

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote