Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Mold Inspection · Liscomb, IA

Mold Inspection in Liscomb

Mold Inspection in Liscomb, IA by Closer Look Inspectors. A photo-mapped digital report within 24 hours.

Get Your Free Instant QuoteSee What's Included
Liscomb · Marshall County

Mold Inspection in Liscomb

Mold Inspection in Liscomb, Marshall County, by Closer Look Inspectors. Liscomb is a small Marshall County rail town of older homes platted in 1869.

A mold and moisture inspection — mold testing and mold detection in one visit — pairs infrared moisture mapping with lab-backed sampling to locate active moisture and trace it to its source — a frequent issue in Iowa basements and older housing stock.

Questions about a Liscomb home?  ·  Call or text (563) 517-7815

Modern white farmhouse-style home with black windows and dark garage doors — Mold Inspection in Liscomb, IALiscomb
Local housing

Homes in Liscomb.

Liscomb housing runs to late-1800s and early-1900s frame homes from the town's 1869 platting, with a thin postwar layer, across the compact grid along the old Iowa Central alignment and the surrounding Marshall County farm ground, on Iowan Surface ground with long low slopes, and the scattered poorly drained pockets that region is known for — and that mix shapes what a mold inspection here needs to find.

Local conditions in Liscomb

No Iowa law requires a home inspection before a sale — the one mandatory time-of-transfer inspection covers private septic systems (Iowa Code 455B.172) — which makes an independent inspection the only thorough, buyer-side read on a Liscomb home. Liscomb sits in Marshall County, and every Iowa county is EPA Radon Zone 1. Iowa HHS reports Iowa has the largest percentage of homes above the 4.0 pCi/L action level of any state — 71.6 percent in the Iowa Radon Survey — and the Iowa seller disclosure form asks for any known radon test results. Finished basements concentrate it, and only a 48-hour test gives you this home's number. Iowa leaves frost depth to the local building code rather than one statewide number, and the annual freeze-thaw cycle drives the settlement cracks and ice-dam wear that Liscomb-area homes face.

Home inspection in Liscomb →  ·  More about mold inspection →

Questions

Common questions.

How do you test for mold?
Infrared imaging and moisture meters pinpoint wet areas; when the evidence warrants it, samples go to an accredited laboratory.
What drives moisture problems here?
Grading and downspout discharge, below-grade humidity, and the occasional plumbing or roof leak.
Why do flat lots in Liscomb still get wet basements?
Because flat is not the same as well drained. Liscomb sits on the Iowan Surface, which the Iowa Geological Survey describes as gently inclined with long slopes and open horizons, and as carrying scattered areas of poor drainage and original wetlands. On ground like that water does not run off a lot, it sits on it, then works down against the foundation wall. So we still read grading within the first several feet of the house, downspout discharge distance, window-well drainage and sump performance, and look inside for the staining and efflorescence that says water has been there before.
Keep looking

More across Iowa.

Mold Inspection nearby

Other inspections in Liscomb

Questions about mold inspection

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote