Reports within 24 hours · Get your free instant quote
Mold Inspection · Solon, IA

Mold Inspection in Solon

Mold Inspection in Solon, IA by Closer Look Inspectors. A photo-mapped digital report within 24 hours.

Solon · Johnson County

Mold Inspection in Solon

Mold Inspection in Solon, Johnson County, by Closer Look Inspectors. Solon is a growing Johnson County town near Lake Macbride.

A mold and moisture inspection — mold testing and mold detection in one visit — pairs infrared moisture mapping with lab-backed sampling to locate active moisture and trace it to its source — a frequent issue in Iowa basements and older housing stock.

Questions about a Solon home?  ·  Call or text (563) 517-7815

Modern white farmhouse-style home with black windows and dark garage doors — Mold Inspection in Solon, IASolon
Local housing

Homes in Solon.

Solon housing runs to a mix of nineteenth-century and early-1900s town houses and a large recent layer — the town grew about 48 percent between 2010 and 2020, across the older platted town around the main street, the newer subdivisions built out around it, and the lake-adjacent property toward Lake Macbride, on Johnson County ground between the Iowa River corridor and the Coralville reservoir drainage, gently rolling with loess over till — and that mix shapes what a mold inspection here needs to find.

Local conditions in Solon

No Iowa law requires a home inspection before a sale — the one mandatory time-of-transfer inspection covers private septic systems (Iowa Code 455B.172) — which makes an independent inspection the only thorough, buyer-side read on a Solon home. Solon sits in Johnson County, and every Iowa county is EPA Radon Zone 1. Iowa HHS reports Iowa has the largest percentage of homes above the 4.0 pCi/L action level of any state — 71.6 percent in the Iowa Radon Survey — and the Iowa seller disclosure form asks for any known radon test results. Finished basements concentrate it, and only a 48-hour test gives you this home's number. Iowa leaves frost depth to the local building code rather than one statewide number, and the annual freeze-thaw cycle drives the settlement cracks and ice-dam wear that Solon-area homes face.

Questions

Common questions.

How do you test for mold?
Infrared imaging and moisture meters pinpoint wet areas; when the evidence warrants it, samples go to an accredited laboratory.
What drives moisture problems here?
Grading and downspout discharge, below-grade humidity, and the occasional plumbing or roof leak.
Does lake-area property near Solon need anything extra looked at?
Yes, and it splits two ways. Solon was platted in 1840 and incorporated April 28, 1877 but grew 48.2 percent between 2010 and 2020, so you are choosing between genuinely old town houses and near-new subdivision construction — and near Lake Macbride State Park, between year-round houses and buildings that began as seasonal. Anything converted from seasonal use gets checked stage by stage: original footings, later insulation, added heat and plumbing, and whether the crawlspace was ever sealed. Private wells and septic outside town get their own evaluations.
Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote