Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Mold Inspection · St. Paul Park, MN

Mold Inspection in St. Paul Park

Mold Inspection in St. Paul Park, MN by Closer Look Inspectors. A photo-mapped digital report within 24 hours.

Get Your Free Instant QuoteSee What's Included
St. Paul Park · Washington County

Mold Inspection in St. Paul Park

Mold Inspection in St. Paul Park, Washington County, by Closer Look Inspectors. St. Paul Park is a Mississippi River city founded in 1887 beside a working oil refinery.

A mold and moisture inspection — mold testing and mold detection in one visit — pairs infrared moisture mapping with lab-backed sampling to locate active moisture and trace it to its source — a frequent issue in Minnesota basements and older housing stock.

St. Paul Park is served by our Eagan team →  ·  (612) 457-1634

Craftsman bungalow with a covered front porch and stone columns — Mold Inspection in St. Paul Park, MNSt. Paul Park
Local housing

Homes in St. Paul Park.

St. Paul Park housing runs to older houses from the 1887 founding era and after, plus mid-century homes and newer infill and townhome developments, across the older street grid, the U.S. 61 and 10 corridor, and the streets next to the refinery and the river bottoms, on Mississippi River terrace and floodplain on the east bank in southern Washington County — and that mix shapes what a mold inspection here needs to find.

Local conditions in St. Paul Park

St. Paul Park does not run a point-of-sale housing ordinance, which makes an independent inspection the only thorough, buyer-side read on the home. St. Paul Park sits in Washington County, in EPA Radon Zone 1, and MDH reports more than two in five Minnesota homes have radon levels that pose a significant health risk. Finished basements concentrate radon, and only a 48-hour test tells you the number. Footings here must reach the 3-1/2-foot depth Minnesota Rules 1303.1600 set for the southern frost zone, and that annual freeze-thaw cycle is what drives the settlement cracks, frost heave and ice-dam wear that St. Paul Park-area homes face.

Mold Inspection in St. Paul Park: what matters

Dehumidifier in a basement, newer home: mold inspection in St. Paul Park, MN
Foundation Inspection in St. Paul Park →
Small humidity gauge on a shelf (no readable text), older home: mold inspection in St. Paul Park, MN
Roof Inspection in St. Paul Park →
Frost and condensation on a window sill, newer home: mold inspection in St. Paul Park, MN
HVAC Inspection in St. Paul Park →

Home inspection in St. Paul Park →  ·  More about mold inspection →

Questions

Common questions.

How do you test for mold?
Infrared imaging and moisture meters pinpoint wet areas; when the evidence warrants it, samples go to an accredited laboratory.
What drives moisture problems here?
Grading and downspout discharge, below-grade humidity, and the occasional plumbing or roof leak.
How old are the oldest houses in St. Paul Park?
The village was platted in 1887 and had 1,200 residents within a year, so the oldest houses could date to the late 1880s or 1890s. Many lots then sat empty or were sold at auction after the 1893 panic, so houses on one block may date from very different decades. The year in the county record is only a start. The wiring, foundation, and framing show what the house really is.
Does living near the St. Paul Park refinery change what gets inspected?
The refinery is a fixture of the city, and it belongs in a buyer's notes, but the inspection is still of the house. St. Paul Park was founded in 1887 and had more than 200 residences by 1888, so some of its housing is very old. Old cast-iron and galvanized plumbing, original wiring, roofs and chimneys, basement moisture, and sewer laterals are the usual concerns. Homes near the river are also checked for drainage. Noise and air-quality questions are best reviewed with the city.
Keep looking

More across Minnesota.

Mold Inspection nearby

Other inspections in St. Paul Park

Questions about mold inspection

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote