Reports within 24 hours · Get your free instant quote
Closer Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Well Water Testing · Carver, MN

Well Water Testing in Carver

Well water testing for homes on a private well across Minnesota. We collect the sample the right way and send it to an accredited laboratory for…

Get Your Free Instant QuoteSee What's Included
Carver · Carver County

Well Water Testing in Carver

Well water testing for homes on a private well across Minnesota. We collect the sample the right way and send it to an accredited laboratory for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every other year, and arsenic and lead at least once. We also look at the visible wellhead, the pressure tank and the water treatment equipment during the home inspection.

Carver is a small Minnesota River town of historic homes and new development. Housing here runs to a preserved historic river core with new development on the bluff above, across the historic riverfront blocks and the newer subdivisions uphill.

Well water in Carver County

MDA's 2018 township testing in Carver County covered San Francisco Township, where 160 wells were tested and 2.5% were over the 10 mg/L nitrate-nitrogen health standard. That is one township, so treat it as a regional signal. MDH says arsenic runs about 10 percent above 10 ug/L statewide and can vary widely between nearby wells, and it lists coliform yearly, nitrate every other year, and arsenic and lead at least once. We test those plus manganese, iron, hardness, pH, fluoride, sulfate and uranium through an accredited lab.

County facts checked September 2026 against: mda.state.mn.us, mda.state.mn.us, Minnesota Department of Health, Minnesota Department of Health.

See all Carver inspections →  ·  More about well water testing →

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What do you test for?
Our lab panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every other year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Book it with the home inspection and we collect the sample the same visit, so the lab results arrive with time to act on them inside your inspection window.
Is nitrate a problem for Carver County private wells?
MDA's 2018 initial testing in San Francisco Township found 2.5% of 160 wells over the 10 mg/L health standard. One township does not describe every property. Nitrate is only one item, so we pair it with coliform/E. coli, arsenic, lead and manganese on the same accredited lab report. Coliform bacteria and E. coli are the pass-fail items lenders and buyers ask about first.
Is flooding a factor for Carver's historic riverfront homes?
River-valley ground makes flood history, grading and basement moisture the first things to establish on the older riverfront stock. The newer homes up on the bluff are a different read — there the focus is build quality and drainage on graded slopes.
Keep looking

More across Minnesota.

Well Water Testing nearby

Other inspections in Carver

Questions about well water testing

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote