Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Mold & Moisture Inspection · Franklin, IA

Mold & Moisture Inspection in Franklin

Mold & Moisture Inspection in Franklin, IA by Closer Look Inspectors. A photo-mapped digital report within 24 hours.

Get Your Free Instant QuoteSee What's Included
Franklin · Lee County

Mold & Moisture Inspection in Franklin

Mold & Moisture Inspection in Franklin, Lee County, by Closer Look Inspectors. Franklin is a small Lee County town laid out as Franklin Centre on March 21, 1840, by James L. Scott and Samuel C. Reed and known for stone and brick Federal architecture, and we calibrate every visit to that.

A mold and moisture inspection — mold testing and mold detection in one visit — pairs infrared moisture mapping with lab-backed sampling to locate active moisture and trace it to its source — a frequent issue in Iowa basements and older housing stock.

Franklin homes are inspected by a local partner in our Iowa network.  ·  Call or text (563) 517-7815

Two-storey home with gabled roof and attached two-car garage — Mold & Moisture Inspection in Franklin, IAFranklin
Calibrated

Tuned to Franklin.

Franklin housing runs to stone and brick houses from the 1840s through the 1870s, the town's 1870 peak of 628 residents, and a smaller stock of later homes, across the compact townsite of about 0.16 square miles including the streets around 6th and Green Streets, and the farm ground around town, on loess-mantled hills of the Southern Iowa Drift Plain in Lee County — and that mix shapes what a mold & moisture inspection here needs to find. Instrument-grade tools, a local eye, every visit.

Local conditions in Franklin

No Iowa law requires a home inspection before a sale — the one mandatory time-of-transfer inspection covers private septic systems (Iowa Code 455B.172) — which makes an independent inspection the only thorough, buyer-side read on a Franklin home. Franklin sits in Lee County, and every Iowa county is EPA Radon Zone 1. Iowa HHS reports Iowa has the largest percentage of homes above the 4.0 pCi/L action level of any state — 71.6 percent in the Iowa Radon Survey — and the Iowa seller disclosure form asks for any known radon test results. Finished basements concentrate it, and only a 48-hour test gives you this home's number. Iowa leaves frost depth to the local building code rather than one statewide number, and the annual freeze-thaw cycle drives the settlement cracks and ice-dam wear we calibrate every Franklin visit to find.

See all Franklin inspections →  ·  More about mold & moisture inspection →

Questions

Common questions.

How do you test for mold?
Infrared imaging and moisture meters pinpoint wet areas; when the evidence warrants it, samples go to an accredited laboratory.
What drives moisture problems here?
Grading and downspout discharge, below-grade humidity, and the occasional plumbing or roof leak.
Franklin has stone and brick Federal-style buildings. What should I check in a masonry house this old?
Masonry houses from the mid-1800s reward a careful look at the walls. We check mortar joints and tuckpointing, bowing or stair-step cracks, spalling brick, lintels over openings and any sagging rooflines. We also look at how grade and downspouts direct water to the walls, plus basement stain lines, floor framing bearing on the masonry, and chimney condition. Lee County is EPA Radon Zone 1, so radon testing belongs in the basement review.
Keep looking

More across Iowa.

Mold & Moisture Inspection nearby

Other inspections in Franklin

Questions about mold & moisture inspection

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote