Reports within 24 hours · Get your free instant quote
Well Water Testing · Bowlus, MN

Water testing in Bowlus

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Bowlus · Morrison County

Well Water Testing in Bowlus

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.

Bowlus is a Soo Line lumber-and-clay town in southwest Morrison County, platted in 1907. Housing here runs to early-1900s houses from the Soo Line and lumber-town years, with mid-century and newer homes mixed in, across the village blocks around the church, the two cafes and the fire hall, and farm ground toward the Two River.

Bowlus is served by our Big Lake team →  ·  (612) 457-1634

PEX water manifold in a newer Minnesota basement: well water testing in Bowlus, MN
DRO: a screen for diesel and heating-oil petroleum →

Well water in Morrison County

In its 2013-2016 township testing of 11 townships, the final dataset of 1,104 wells had 10.8% at or over the 10 mg/L health risk limit. Agram Township reached 47.3%, Belle Prairie 11.5% and Ripley 12.8%, while Elmdale was 3.1%. Results vary a lot by township, so test each well. MDH lists coliform yearly, nitrate every year, and arsenic and lead at least once.

County facts checked September 2026 against: mda.state.mn.us, morrisoncountymn.gov, Minnesota Department of Health, Minnesota Department of Health.

Under-sink reverse osmosis filter in an older fieldstone Minnesota basement: well water testing in Bowlus, MN
Nitrate: EPA limit 10 mg/L, highest risk to infants →

Home inspection in Bowlus →  ·  More about well water testing →  ·  Every water test, explained →

Pairs well with:

Water tests available in Bowlus

Bacteria

Shows whether surface water or waste is reaching the well.

  • Surface contamination reaching the well
    None should be present (MDH)
  • Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Compare your lab results with these values.

Bowlus private well testing timeline

Minnesota Department of Health schedule: coliform bacteria and nitrate every year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

When to test your water

  • Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
  • At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
  • Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
  • When you buy a homeA full baseline while you can still ask questions or negotiate.
  • After flooding or well workFlooding and repairs to the well are reasons to test again.
  • When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
  • Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
  • City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.

Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.

How to get it done

  1. Choose your testsPick the water testing you need in the free instant quote.
  2. Pick a timeBook online. The quote takes about 30 seconds.
  3. Get certified lab resultsA certified laboratory analyzes the water and reports each result.

Get Your Free Instant Quote

Nitrate in Morrison County wells

10.8%

10.8% of 1,104 wells tested in 11 townships were at or over the 10 mg/L nitrate standard (MDA township testing, 2013-2016).

Source: Minnesota Department of Agriculture township testing

Township numbers are averages. Only a test of your own well tells you its nitrate level. Get a free instant quote

How far a well must be from common hazards in Bowlus

  • Building (closest projection)3 ft
  • Lake, river, stream or pond35 ft
  • Septic tank50 ft
  • Drainfield (soil dispersal area)50 ft (100 ft sensitive well)
  • Animal feedlot or building (over 1 animal unit)50 ft
  • Cesspool or seepage pit75 ft (150 ft sensitive well)
  • Unroofed feedlot, 300+ animal units100 ft
  • Unprotected petroleum tank, 1,100+ gallons150 ft
Source: Minnesota Rules 4725.4450 and 4725.4350

Septic, feedlot or fuel tank near the well? A coliform and nitrate test shows whether it is reaching the water. Get a free instant quote

Arsenic in Bowlus private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
How high is nitrate in Morrison County private wells?
In MDA's 2013-2016 testing, 10.8% of 1,104 wells in 11 townships were at or over 10 mg/L nitrate-nitrogen. Agram Township was 47.3%, Ripley 12.8%, Belle Prairie 11.5%, Elmdale 3.1%.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
Bowlus once made brick, barrels and lumber — does that history show in the houses?
It can. Bowlus was platted in 1907 by the Soo Line, incorporated in 1908, and had a sawmill, lumberyard, barrel factory and a brick and tile company using clay along the Two River. Older houses can have brick or block foundations, heavy timber framing and additions from different eras. Foundation cracks and moisture, old wiring, roof condition and chimneys are the common concerns. Morrison County is Frost Zone I and EPA Radon Zone 2, so footing depth on additions is worth asking about, and a radon test is recommended.
Why would I need a DRO test on a house I'm buying?
A DRO test may be worth considering if the property has an old fuel or heating oil tank, or is near a petroleum release or contaminated site. It helps show whether petroleum may be present and which further tests are needed. Ask the seller for tank and release history as well.
What does a positive total coliform result mean in well water?
Coliform bacteria are common on the ground surface, so a positive result suggests surface contamination has entered the well. Most coliform bacteria do not cause disease, but their presence suggests disease-causing microorganisms may also be in the water. MDH advises using boiled or bottled water until the well is disinfected and a retest comes back negative.
Why are abandoned or unused wells dangerous?
The Department of Health lists two kinds of risk. Children and small animals can fall into an open well, and equipment can break through a crumbling well or well pit. An unused well can also act like a drain, giving surface runoff, contaminated water, or waste a direct path into drinking water sources, including your own well. Annual water testing is one way to watch for contamination, as the Department of Health recommends testing annually where unused wells exist.
What should I look for on a well cap?
The Department of Health asks owners to check whether the well cap is securely attached, broken, or missing, whether the casing has cracks, holes, or corrosion, and whether electrical conduit and other connections are watertight. Under Minnesota Rules 4725.5450, a vent must be screened with openings of 1/16 inch or less and point downward. A damaged cap or vent is a good reason to test for coliform bacteria.
Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote