Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Well Water Testing · Maple Plain, MN

Water testing in Maple Plain

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Get Your Free Instant QuoteSee What's Included
Maple Plain · Hennepin County

Well Water Testing in Maple Plain

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.

Maple Plain is a small Highway 12 town of older and postwar homes west of Lake Minnetonka. Housing here runs to older and postwar homes, across the Highway 12 core west of Lake Minnetonka.

Maple Plain is served by our Big Lake team →  ·  (612) 457-1634

Frost-free yard hydrant in a farmyard at a Minnesota home in summer: well water testing in Maple Plain, MN
Nitrate: EPA limit 10 mg/L, highest risk to infants →

Well water in Hennepin County

Hennepin County has no MDA township nitrate report on the schedule page, so there is no county well percentage to cite. MDH says about 10 percent of Minnesota private wells have arsenic above 10 ug/L, with levels varying over short distances, and that shallow and sand-aquifer wells are most exposed to nitrate. Boiling does not remove nitrate; it concentrates it. MDH lists coliform yearly, nitrate every year, and arsenic and lead at least once.

County facts checked September 2026 against: hennepincounty.gov, mda.state.mn.us, Minnesota Department of Health, Minnesota Department of Health, Minnesota Department of Health.

Outdoor spigot running clear water at a Minnesota home in autumn color: well water testing in Maple Plain, MN
Arsenic: about 10% of Minnesota wells exceed the standard →

Home inspection in Maple Plain →  ·  More about well water testing →  ·  Every water test, explained →

Pairs well with:

Septic inspection in Maple PlainRadon testing in Maple PlainSewer scope in Maple Plain

Water tests available in Maple Plain

Bacteria

Shows whether surface water or waste is reaching the well.

  • Total coliform bacteria
    Surface contamination reaching the well
    None should be present (MDH)
  • E. coli
    Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Nitrate
    Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Arsenic
    Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead
    Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Compare your lab results with these values.

Maple Plain private well testing timeline

Minnesota Department of Health schedule: coliform bacteria and nitrate every year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

When to test your water

  • Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
  • At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
  • Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
  • When you buy a homeA full baseline while you can still ask questions or negotiate.
  • After flooding or well workFlooding and repairs to the well are reasons to test again.
  • When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
  • Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
  • City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.

Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.

How to get it done

  1. Choose your testsPick the water testing you need in the free instant quote.
  2. Pick a timeBook online. The quote takes about 30 seconds.
  3. Get certified lab resultsA certified laboratory analyzes the water and reports each result.

Get Your Free Instant Quote

How deep Maple Plain wells go

15 ftsand and gravel (most wells)sandstone and limestone (SE and east central, incl. Twin Cities)1,000+ ft · fractured rock such as granite (NE)
Source: MDH Well Owner's Handbook

Depth and aquifer change what is in the water. Test the well you are buying, not the neighbor's. Get a free instant quote

Arsenic in Maple Plain private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
Do Hennepin County homes with private wells need arsenic testing?
MDH says about 10 percent of Minnesota private wells exceed 10 ug/L arsenic and that it can vary a lot between nearby wells, so it advises testing at least once.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
Do you cover Maple Plain?
Yes — the small west-Hennepin town's older and postwar stock gets an experienced read on original systems and site drainage.
How do I get rid of E. coli in my well?
Disinfect the well with a chlorine solution, either through a licensed well contractor or by following the MDH well disinfection instructions. Then have an accredited lab retest the water before you drink it. MDH suggests testing again two to four weeks later, and a contractor can look for the entry point if it returns.
How do you get rid of VOCs in well water?
MDH advises first removing the source of contamination or using a safer water supply. If that is not possible, home treatment may be appropriate, and some technologies can reduce VOCs depending on the filter media. Choose a certified unit, use a licensed plumber or water conditioning contractor, and retest after installation.
What is a sand-point well and is it riskier?
A drive-point (sand-point) well is a pointed screen on tightly coupled steel pipe, usually 1.25 inches in diameter, driven below the water table. The Department of Health notes that dug, bored, and drive-point wells are often under 50 feet deep and are more likely to be contaminated by surface water, septic sewage, or chemical spills. Shallower wells are a reason for regular coliform and nitrate testing.
What should I look for on a well cap?
The Department of Health asks owners to check whether the well cap is securely attached, broken, or missing, whether the casing has cracks, holes, or corrosion, and whether electrical conduit and other connections are watertight. Under Minnesota Rules 4725.5450, a vent must be screened with openings of 1/16 inch or less and point downward. A damaged cap or vent is a good reason to test for coliform bacteria.
Keep looking

More across Minnesota.

Well Water Testing nearby

Other inspections in Maple Plain

Questions about well water testing

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote