Reports within 24 hours · Get your free instant quote
Well Water Testing · Morristown, MN

Water testing in Morristown

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Morristown · Rice County

Well Water Testing in Morristown

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.

Morristown is a small Cannon River town west of Faribault. Housing here runs to small Cannon River town homes, across the river core west of Faribault.

Morristown is served by our Faribault team →  ·  (612) 457-1634

Well water in Rice County

MDA's 2017 township testing in Rice County covered Bridgewater, Cannon City, Morristown and Northfield: 478 wells were sampled, 5.6% initially at or over the 10 mg/L nitrate limit, and 1.6% of the 428 wells in the final dataset. Township results ran from 0% in Cannon City to 5.1% in Northfield. The MDA report says the St. Peter-Prairie du Chien-Jordan aquifer supplies most wells there and only about 5% draw from Quaternary aquifers. MDH adds that arsenic occurs statewide.coli, nitrate, arsenic, lead, manganese, iron, hardness, pH, fluoride, sulfate, uranium, VOCs and DRO (diesel range organics) through an accredited lab.

County facts checked September 2026 against: Minnesota Department of Health, Minnesota Department of Health, Minnesota Department of Health, mda.state.mn.us, ricecountymn.gov.

Home inspection in Morristown →  ·  More about well water testing →  ·  Every water test, explained →

Pairs well with:

Water tests available in Morristown

Bacteria

Shows whether surface water or waste is reaching the well.

  • Surface contamination reaching the well
    None should be present (MDH)
  • Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Compare your lab results with these values.

Morristown private well testing timeline

Minnesota Department of Health schedule: coliform bacteria and nitrate every year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

When to test your water

  • Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
  • At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
  • Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
  • When you buy a homeA full baseline while you can still ask questions or negotiate.
  • After flooding or well workFlooding and repairs to the well are reasons to test again.
  • When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
  • Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
  • City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.

Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.

How to get it done

  1. Choose your testsPick the water testing you need in the free instant quote.
  2. Pick a timeBook online. The quote takes about 30 seconds.
  3. Get certified lab resultsA certified laboratory analyzes the water and reports each result.

Get Your Free Instant Quote

Nitrate in Rice County wells

1.6%

1.6% of 428 wells tested in Bridgewater, Cannon City, Morristown and Northfield were at or over the 10 mg/L nitrate standard (MDA township testing, 2017).

Source: Minnesota Department of Agriculture township testing

Township numbers are averages. Only a test of your own well tells you its nitrate level. Get a free instant quote

How far a well must be from common hazards in Morristown

  • Building (closest projection)3 ft
  • Lake, river, stream or pond35 ft
  • Septic tank50 ft
  • Drainfield (soil dispersal area)50 ft (100 ft sensitive well)
  • Animal feedlot or building (over 1 animal unit)50 ft
  • Cesspool or seepage pit75 ft (150 ft sensitive well)
  • Unroofed feedlot, 300+ animal units100 ft
  • Unprotected petroleum tank, 1,100+ gallons150 ft
Source: Minnesota Rules 4725.4450 and 4725.4350

Septic, feedlot or fuel tank near the well? A coliform and nitrate test shows whether it is reaching the water. Get a free instant quote

Arsenic in Morristown private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
Which aquifer do Rice County wells use?
MDA's Rice County report says most wells in the tested area draw from the St. Peter-Prairie du Chien-Jordan aquifer, which spans the whole testing area, and only about 5% draw from Quaternary aquifers. Its 2017 sampling found 1.6% of final-dataset wells at or over the nitrate limit. Well depth varies by property, so testing is still the check.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
Do you cover Morristown?
Yes — the small river town west of Faribault is in core service area. River-valley ground puts drainage and basement moisture first, then the systems typical of an older small-town stock.
Is there a safe level of lead in drinking water?
No. MDH states that there is no safe level of lead. The EPA action level of 15 parts per billion for public water systems is a point at which a utility must act, not a level considered safe. Babies, children under six, and pregnant women are at highest risk.
What does a positive total coliform result mean in well water?
Coliform bacteria are common on the ground surface, so a positive result suggests surface contamination has entered the well. Most coliform bacteria do not cause disease, but their presence suggests disease-causing microorganisms may also be in the water. MDH advises using boiled or bottled water until the well is disinfected and a retest comes back negative.
Do I need to test my well after a flood?
Yes. The Department of Health says if flood water reached your well or covered the casing top, assume it is contaminated and do not use it for drinking, cooking, or brushing teeth until disinfection and a negative coliform test. If flood water came within 50 feet but did not reach the well, testing is advised as a precaution. A coliform test is the step that confirms the water after flooding.
How can I tell if there is a forgotten well on my property?
The Department of Health suggests looking for a pipe 1 to 8 inches wide at, above, or below the surface, a low spot or sunken area, a metal, wood, or concrete cover, a windmill or old well house, and a concrete patch or glass block in a basement step or floor. Well pits and basement offsets are other common signs. Visible signs like these are worth raising with your agent and a licensed well contractor.
Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote