Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Well Water Testing · Elysian, MN

Water testing in Elysian

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Get Your Free Instant QuoteSee What's Included
Elysian · Le Sueur County

Well Water Testing in Elysian

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.

Elysian is a small lake-country town between Mankato and Faribault. Housing here runs to small lake-country town homes, many converted from seasonal use, across the lake-side neighborhoods.

Questions about a Elysian home?  ·  Call or text (612) 457-1634

Well water in Le Sueur County

MDA sampled Kasota and Ottawa townships in Le Sueur County in 2018 and reported the results in 2019 and 2020, so state nitrate data exists for part of the county. MDH says arsenic occurs across Minnesota, with about 40 percent of new wells since 2008 showing a detection. On manganese, MDH notes southwestern Minnesota tends higher, some wells over 1,000 µg/L, and the southeast tends low, so a well in this south-central county needs its own result.coli, nitrate, arsenic, lead, manganese, iron, hardness, pH, fluoride, sulfate, uranium, VOCs and DRO (diesel range organics) through an accredited lab.

County facts checked September 2026 against: Minnesota Department of Health, Minnesota Department of Health, Minnesota Department of Health, mda.state.mn.us, lesueurcounty.gov.

Home inspection in Elysian →  ·  More about well water testing →  ·  Every water test, explained →

Pairs well with:

Septic inspection in ElysianRadon testing in ElysianSewer scope in Elysian

Water tests available in Elysian

Bacteria

Shows whether surface water or waste is reaching the well.

  • Total coliform bacteria
    Surface contamination reaching the well
    None should be present (MDH)
  • E. coli
    Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Nitrate
    Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Arsenic
    Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead
    Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Compare your lab results with these values.

Elysian private well testing timeline

Minnesota Department of Health schedule: coliform bacteria and nitrate every year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

When to test your water

  • Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
  • At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
  • Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
  • When you buy a homeA full baseline while you can still ask questions or negotiate.
  • After flooding or well workFlooding and repairs to the well are reasons to test again.
  • When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
  • Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
  • City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.

Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.

How to get it done

  1. Choose your testsPick the water testing you need in the free instant quote.
  2. Pick a timeBook online. The quote takes about 30 seconds.
  3. Get certified lab resultsA certified laboratory analyzes the water and reports each result.

Get Your Free Instant Quote

Private wells and water systems around Elysian

Elysian, MN water testing: well cap in the foreground, lake home with a boathouse behind it on a Minnesota lake in summer
Coliform bacteria: MDH recommends testing every year →
Well cap in the foreground, lake home with a sloping lawn behind it on a Minnesota lake in spring green (Le Sueur County, Minnesota)
Nitrate: EPA limit 10 mg/L, highest risk to infants →
Elysian, MN water testing: well cap in the foreground, A-frame cabin behind it on a Minnesota lake in summer
Arsenic: about 10% of Minnesota wells exceed the standard →

How far a well must be from common hazards in Elysian

  • Building (closest projection)3 ft
  • Lake, river, stream or pond35 ft
  • Septic tank50 ft
  • Drainfield (soil dispersal area)50 ft (100 ft sensitive well)
  • Animal feedlot or building (over 1 animal unit)50 ft
  • Cesspool or seepage pit75 ft (150 ft sensitive well)
  • Unroofed feedlot, 300+ animal units100 ft
  • Unprotected petroleum tank, 1,100+ gallons150 ft
Source: Minnesota Rules 4725.4450 and 4725.4350

Septic, feedlot or fuel tank near the well? A coliform and nitrate test shows whether it is reaching the water. Get a free instant quote

Arsenic in Elysian private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
Has the state tested nitrate in Le Sueur County wells?
MDA's Township Testing Program sampled Kasota and Ottawa townships in 2018, with an initial overview in 2019 and a final one in 2020. Those reports cover just two townships. MDH recommends testing nitrate every year, so a buyer should test the actual well rather than lean on a township average.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
Are Elysian's converted lake homes a special case?
Yes — seasonal cabins converted to year-round use are the recurring pattern here, and they often carry undersized heating, thin insulation and foundations never built to frost depth. Those are the first things to look at.
How do you get rid of coliform bacteria in a well?
The usual method is shock chlorination, also called well disinfection. A licensed well contractor can do it, or owners can follow the MDH well disinfection instructions. Afterward, have an accredited lab retest the water. MDH suggests retesting again about two to four weeks later because coliform can regrow, and repeating disinfection if it returns.
Does boiling water remove nitrate?
No. MDH warns that boiling makes nitrate more concentrated because water evaporates and the nitrate stays behind. If your well is above 10 mg/L, use bottled water or another safe alternative for drinking and for infant formula, and have a licensed well contractor inspect the well.
Does the well disclosure apply to sand-point and dug wells too?
Yes. The Minnesota Department of Health says the disclosure law covers all types of wells, whether used for drinking water, irrigation, livestock, heating or cooling, or monitoring. That includes drive-point (sand-point) wells, drilled wells, and dug wells. The law is Minnesota Statutes section 103I.235, part of the Ground Water Protection Act. Ask for the disclosure early, then have the in-use well tested before closing.
How long does a well last, and are older wells riskier?
The Department of Health says a well's life varies: some last 100 or more years, though 25 to 50 years is more common. It lists wells built before 1974, when the Minnesota Well Code began, as higher risk for microbial contamination, along with leaking dug wells, wells in old frost pits, and wells with corroded casings. If the home's well predates 1974 or sits in a pit, a coliform test is a sensible baseline.
Keep looking

More across Minnesota.

Well Water Testing nearby

Other inspections in Elysian

Questions about well water testing

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote