Water testing in Gilman
Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…
Well Water Testing in Gilman
Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.
Gilman is a small Benton County farm town on Highway 25 anchored by Sts. Peter and Paul Catholic Church. Housing here runs to older farm-town homes, mid-century ranch houses and a few newer builds, in a city of about 226 people, across the small townsite around Sts. Peter and Paul Catholic Church, Highway 25 and County Road 3, and the farmland beyond.
Well water in Benton County
Benton sits in central Minnesota, where MDH says the highest shares of new wells with arsenic detections are found, so a first arsenic test is worth doing on any private well. MDA's Township Testing Program sampled Langola, Maywood, Minden and Watab townships: the final dataset held 690 wells and 7.2% were at or over the 10 mg/L nitrate limit, with Langola at 14.4%. MDH also gives 100 µg/L as the safe manganese level for infant formula.coli, nitrate, arsenic, lead, manganese, iron, hardness, pH, fluoride, sulfate, uranium, VOCs and DRO (diesel range organics) through an accredited lab.
County facts checked September 2026 against: Minnesota Department of Health, Minnesota Department of Health, Minnesota Department of Health, mda.state.mn.us, bentoncountymn.gov, mndata.web.health.state.mn.us.
Home inspection in Gilman → · More about well water testing → · Every water test, explained →
Pairs well with:
Water tests available in Gilman
Bacteria
Shows whether surface water or waste is reaching the well.
- Surface contamination reaching the wellNone should be present (MDH)
- Fecal contamination from septic, manure or wildlifeNone should be present (MDH)
Health chemicals
No taste, color or smell. These are the long-term health checks.
- Fertilizer, septic and manure; highest risk to infants10 mg/L (EPA)
- Natural arsenic from Minnesota rock and soil10 µg/L (EPA)
- Lead service lines, solder and brass fixturesNo safe level (MDH)
- ManganeseNatural manganese; a concern for infants100 µg/L for infants (MDH guidance)
- FluorideNatural fluoride; dental health4.0 mg/L (EPA)
- UraniumNatural radionuclide in groundwater30 µg/L (EPA)
Petroleum & solvents
Fuel and chemical spills from old tanks or nearby sites.
Household quality
Staining, scale and taste, and choosing the right treatment.
- IronRusty staining and metallic taste0.3 mg/L, aesthetic (MDH)
- HardnessScale buildup; sizing a water softenerNo health standard
- pHCorrosive or scaling water6.5 to 8.5, aesthetic (EPA)
- SulfateTaste and odor; diarrhea risk for infants250 mg/L, aesthetic (EPA)
Limits from MDH, EPA and MPCA. Compare your lab results with these values.
Gilman private well testing timeline
| Test | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 | Year 6 |
|---|---|---|---|---|---|---|
| Coliform bacteria | ||||||
| Nitrate | ||||||
| Arsenic | ||||||
| Lead |
When to test your water
- Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
- At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
- Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
- When you buy a homeA full baseline while you can still ask questions or negotiate.
- After flooding or well workFlooding and repairs to the well are reasons to test again.
- When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
- Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
- City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.
Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.
How to get it done
- Choose your testsPick the water testing you need in the free instant quote.
- Pick a timeBook online. The quote takes about 30 seconds.
- Get certified lab resultsA certified laboratory analyzes the water and reports each result.
Water testing in Gilman: what matters
Nitrate in Benton County wells
7.2% of 690 wells tested in Langola, Maywood, Minden and Watab townships were at or over the 10 mg/L nitrate standard (MDA township testing, None).
Township numbers are averages. Only a test of your own well tells you its nitrate level. Get a free instant quote
How deep Gilman wells go
Depth and aquifer change what is in the water. Test the well you are buying, not the neighbor's. Get a free instant quote
Arsenic in Gilman private wells, out of every 100
About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard
You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote
Common questions.
Who needs well water testing?
What does the water panel cover?
How often should a well be tested?
Is well water testing part of the home inspection?
What did the state find when it tested nitrate in Benton County wells?
My home is on city water. Is water testing still worth it?
When should a home be tested for DRO or VOCs?
Does the sandy ground around Gilman change what an inspector checks?
Does boiling water remove nitrate?
What does it mean if E. coli is found in my well water?
When does the state recommend shock chlorination of a well?
Does the well disclosure apply to sand-point and dug wells too?
More across Minnesota.
Well Water Testing nearby
- Well Water Testing in Foley · Benton County
- Well Water Testing in Foreston · Mille Lacs County
- Well Water Testing in Buckman · Morrison County
- Well Water Testing in Sauk Rapids · Benton County
- Well Water Testing in Rice · Benton County
- Well Water Testing in Milaca · Mille Lacs County
Other inspections in Gilman
- Residential Inspection in Gilman
- Buyer's Inspection in Gilman
- Pre-Listing Inspection in Gilman
- Radon Testing in Gilman
- Sewer Scope Inspection in Gilman
- Thermal Imaging in Gilman
- Mold Inspection in Gilman
- Foundation Inspection in Gilman
- Roof Inspection in Gilman
- HVAC Inspection in Gilman
- Electrical Inspection in Gilman
- Plumbing Inspection in Gilman
- New Construction Inspection in Gilman
- 11-Month Warranty Inspection in Gilman
Questions about well water testing
Build your quote in 30 seconds.
No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.



