Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Well Water Testing · Stillwater, MN

Water testing in Stillwater

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Get Your Free Instant QuoteSee What's Included
Stillwater · Washington County

Well Water Testing in Stillwater

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.

Stillwater is a historic St. Croix River town with hillside Victorians and steep bluff lots. Housing here runs to hillside Victorians and historic riverfront homes, across the bluff neighborhoods above the St. Croix and the historic downtown.

Questions about a Stillwater home?  ·  Call or text (612) 457-1634

Well water in Washington County

MDA's 2014-2015 township testing in Washington County covered Cottage Grove and Denmark. The final dataset held 441 wells with 15.0% at or over the 10 mg/L nitrate-nitrogen health risk limit. Cottage Grove (city) was 20.2% and Denmark 8.3%. MDA said Cottage Grove had more than 10% of wells over the limit. MDH lists coliform yearly, nitrate every year, and arsenic and lead at least once.

County facts checked September 2026 against: washingtoncountymn.gov, mda.state.mn.us, Minnesota Department of Health.

Home inspection in Stillwater →  ·  More about well water testing →  ·  Every water test, explained →

Pairs well with:

Septic inspection in StillwaterRadon testing in StillwaterSewer scope in Stillwater

Water tests available in Stillwater

Bacteria

Shows whether surface water or waste is reaching the well.

  • Total coliform bacteria
    Surface contamination reaching the well
    None should be present (MDH)
  • E. coli
    Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Nitrate
    Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Arsenic
    Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead
    Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Compare your lab results with these values.

Stillwater private well testing timeline

Minnesota Department of Health schedule: coliform bacteria and nitrate every year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

When to test your water

  • Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
  • At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
  • Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
  • When you buy a homeA full baseline while you can still ask questions or negotiate.
  • After flooding or well workFlooding and repairs to the well are reasons to test again.
  • When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
  • Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
  • City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.

Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.

How to get it done

  1. Choose your testsPick the water testing you need in the free instant quote.
  2. Pick a timeBook online. The quote takes about 30 seconds.
  3. Get certified lab resultsA certified laboratory analyzes the water and reports each result.

Get Your Free Instant Quote

Water testing in Stillwater: what matters

Stillwater, MN water testing: well cap in the foreground, small cabin behind it in the northern Minnesota pine woods in summer
Coliform bacteria: MDH recommends testing every year →
Well cap in the foreground, 1970s rambler behind it in the northern Minnesota pine woods in autumn color (Washington County, Minnesota)
Arsenic: about 10% of Minnesota wells exceed the standard →
Stillwater, MN water testing: well cap in the foreground, modern farmhouse with black windows behind it in the northern Minnesota pine woods in summer
Nitrate: EPA limit 10 mg/L, highest risk to infants →

Nitrate in Washington County wells

15%

15% of 441 wells tested in Cottage Grove and Denmark were at or over the 10 mg/L nitrate standard (MDA township testing, 2014-2015).

Source: Minnesota Department of Agriculture township testing

Township numbers are averages. Only a test of your own well tells you its nitrate level. Get a free instant quote

How deep Stillwater wells go

15 ftsand and gravel (most wells)sandstone and limestone (SE and east central, incl. Twin Cities)1,000+ ft · fractured rock such as granite (NE)
Source: MDH Well Owner's Handbook

Depth and aquifer change what is in the water. Test the well you are buying, not the neighbor's. Get a free instant quote

Arsenic in Stillwater private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
Is nitrate high in Washington County wells?
In MDA's 2014-2015 testing, 15.0% of 441 wells were at or over 10 mg/L. Cottage Grove was 20.2% and Denmark 8.3%, so it depends on location. MDH recommends testing for coliform bacteria every year.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
Are Stillwater's historic homes harder to inspect?
They demand experience with period construction and steep, erosion-prone lots — both of which we know well.
Is nitrate in well water dangerous for babies?
Yes, it can be. Nitrate can cause methemoglobinemia, or blue baby syndrome, which reduces how well blood carries oxygen. Bottle-fed babies under six months are at highest risk. If nitrate is above 10 mg/L, MDH says to use bottled water or another safe source for infant formula.
How do I get rid of E. coli in my well?
Disinfect the well with a chlorine solution, either through a licensed well contractor or by following the MDH well disinfection instructions. Then have an accredited lab retest the water before you drink it. MDH suggests testing again two to four weeks later, and a contractor can look for the entry point if it returns.
How long does a well last, and are older wells riskier?
The Department of Health says a well's life varies: some last 100 or more years, though 25 to 50 years is more common. It lists wells built before 1974, when the Minnesota Well Code began, as higher risk for microbial contamination, along with leaking dug wells, wells in old frost pits, and wells with corroded casings. If the home's well predates 1974 or sits in a pit, a coliform test is a sensible baseline.
How long does a well last, and are older wells riskier?
The Department of Health says a well's life varies: some last 100 or more years, though 25 to 50 years is more common. It lists wells built before 1974, when the Minnesota Well Code began, as higher risk for microbial contamination, along with leaking dug wells, wells in old frost pits, and wells with corroded casings. If the home's well predates 1974 or sits in a pit, a coliform test is a sensible baseline.
Keep looking

More across Minnesota.

Well Water Testing nearby

Other inspections in Stillwater

Questions about well water testing

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote