Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Well Water Testing · Oak Park Heights, MN

Water testing in Oak Park Heights

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Get Your Free Instant QuoteSee What's Included
Oak Park Heights · Washington County

Well Water Testing in Oak Park Heights

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every other year, and arsenic and lead at least once.

Oak Park Heights is a St. Croix bluff-top city of old Oak Park lots, retail corridor and newer subdivisions. Housing here runs to older houses in the original Oak Park plat and on the bluffs, mid-century homes near the commercial corridor, and newer townhome and single-family subdivisions, across the bluff-top streets above the St. Croix River, the Highway 36 and Highway 95 corridors, and the newer subdivisions.

Oak Park Heights is served by our Saint Paul team →  ·  (612) 457-1634

Steel well casing with vented cap in a lawn in Minnesota summer: well water testing in Oak Park Heights, MN
Coliform bacteria: MDH recommends testing every year →

Well water in Washington County

MDA's 2014-2015 township testing in Washington County covered Cottage Grove and Denmark. The final dataset held 441 wells with 15.0% at or over the 10 mg/L nitrate-nitrogen health risk limit. Cottage Grove (city) was 20.2% and Denmark 8.3%. MDA said Cottage Grove had more than 10% of wells over the limit. MDH lists coliform yearly, nitrate every other year, and arsenic and lead at least once.

County facts checked September 2026 against: washingtoncountymn.gov, mda.state.mn.us, Minnesota Department of Health.

Well cap beside a garden bed in Minnesota autumn color: well water testing in Oak Park Heights, MN
Arsenic: about 10% of Minnesota wells exceed the standard →

See all Oak Park Heights inspections →  ·  More about well water testing →  ·  Every water test, explained →

Water tests available in Oak Park Heights

Bacteria

Shows whether surface water or waste is reaching the well.

  • Total coliform bacteria
    Surface contamination reaching the well
    None should be present (MDH)
  • E. coli
    Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Nitrate
    Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Arsenic
    Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead
    Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Your lab report compares each result to these values.

Oak Park Heights private well testing timeline

Minnesota Department of Health schedule: coliform bacteria every year, nitrate every other year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

Test again any time after flooding, after work on the well, or when the water's taste, color or smell changes, and always when you buy a home with a well.

Nitrate in Washington County wells

15%

15% of 441 wells tested in Cottage Grove and Denmark were at or over the 10 mg/L nitrate standard (MDA township testing, 2014-2015).

Source: Minnesota Department of Agriculture township testing

Township numbers are averages. Only a test of your own well tells you its nitrate level. Get a free instant quote

How deep Oak Park Heights wells go

15 ftsand and gravel (most wells)sandstone and limestone (SE and east central, incl. Twin Cities)1,000+ ft · fractured rock such as granite (NE)
Source: MDH Well Owner's Handbook

Depth and aquifer change what is in the water. Test the well you are buying, not the neighbor's. Get a free instant quote

Arsenic in Oak Park Heights private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every other year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
Is nitrate high in Washington County wells?
In MDA's 2014-2015 testing, 15.0% of 441 wells were at or over 10 mg/L. Cottage Grove was 20.2% and Denmark 8.3%, so it depends on location.Coliform bacteria and E. coli are the pass-fail items lenders and buyers ask about first.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
Oak Park Heights sits on St. Croix bluffs — what does that mean for inspecting?
Slopes matter. The city was platted as Oak Park in 1857 and re-platted as Oak Park Heights in 1938, with the 1932 Log Cabin and the Stillwater Overlook (1939) listed on the National Register. Homes on bluff edges and hillsides need checks for retaining walls, foundation movement, drainage and erosion. Older houses get a close look at basements, wiring and roofs. Newer subdivisions get grading, deck ledger and flashing checks.
Is nitrate in well water dangerous for babies?
Yes, it can be. Nitrate can cause methemoglobinemia, or blue baby syndrome, which reduces how well blood carries oxygen. Bottle-fed babies under six months are at highest risk. If nitrate is above 10 mg/L, MDH says to use bottled water or another safe source for infant formula.
How do I get rid of E. coli in my well?
Disinfect the well with a chlorine solution, either through a licensed well contractor or by following the MDH well disinfection instructions. Then have an accredited lab retest the water before you drink it. MDH suggests testing again two to four weeks later, and a contractor can look for the entry point if it returns.
What is a sand-point well and is it riskier?
A drive-point (sand-point) well is a pointed screen on tightly coupled steel pipe, usually 1.25 inches in diameter, driven below the water table. The Department of Health notes that dug, bored, and drive-point wells are often under 50 feet deep and are more likely to be contaminated by surface water, septic sewage, or chemical spills. Shallower wells are a reason for regular coliform and nitrate testing.
What should I look for on a well cap?
The Department of Health asks owners to check whether the well cap is securely attached, broken, or missing, whether the casing has cracks, holes, or corrosion, and whether electrical conduit and other connections are watertight. Under Minnesota Rules 4725.5450, a vent must be screened with openings of 1/16 inch or less and point downward. A damaged cap or vent is a good reason to test for coliform bacteria.
Keep looking

More across Minnesota.

Well Water Testing nearby

Other inspections in Oak Park Heights

Questions about well water testing

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote