Reports within 24 hours · Get your free instant quote
Certified Master Inspector sealCloser Look InspectorsStatewide Minnesota & IowaFree Instant Quote
Well Water Testing · Minnetrista, MN

Water testing in Minnetrista

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli…

Get Your Free Instant QuoteSee What's Included
Minnetrista · Hennepin County

Well Water Testing in Minnetrista

Water testing for Minnesota homes, above all those on a private well. An accredited laboratory tests the water for coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. The Minnesota Department of Health recommends testing a private well for coliform bacteria every year, nitrate every year, and arsenic and lead at least once.

Minnetrista is a mostly rural western Hennepin city of farms, horse properties and Lake Minnetonka bay shoreline. Housing here runs to older farmhouses, mid-century rural homes, and newer lake-area and acreage houses from the growth that took the city to 8,262 people, across the farmland and horse properties along Six Mile Creek, the shoreline around Lake Minnetonka bays, and the lake-dotted country near Whaletail Lake.

Minnetrista is served by our Big Lake team →  ·  (612) 457-1634

Well water in Hennepin County

Hennepin County has no MDA township nitrate report on the schedule page, so there is no county well percentage to cite. MDH says about 10 percent of Minnesota private wells have arsenic above 10 ug/L, with levels varying over short distances, and that shallow and sand-aquifer wells are most exposed to nitrate. Boiling does not remove nitrate; it concentrates it. MDH lists coliform yearly, nitrate every year, and arsenic and lead at least once.

County facts checked September 2026 against: hennepincounty.gov, mda.state.mn.us, Minnesota Department of Health, Minnesota Department of Health, Minnesota Department of Health.

Home inspection in Minnetrista →  ·  More about well water testing →  ·  Every water test, explained →

Pairs well with:

Septic inspection in MinnetristaRadon testing in MinnetristaSewer scope in Minnetrista

Water tests available in Minnetrista

Bacteria

Shows whether surface water or waste is reaching the well.

  • Total coliform bacteria
    Surface contamination reaching the well
    None should be present (MDH)
  • E. coli
    Fecal contamination from septic, manure or wildlife
    None should be present (MDH)

Health chemicals

No taste, color or smell. These are the long-term health checks.

  • Nitrate
    Fertilizer, septic and manure; highest risk to infants
    10 mg/L (EPA)
  • Arsenic
    Natural arsenic from Minnesota rock and soil
    10 µg/L (EPA)
  • Lead
    Lead service lines, solder and brass fixtures
    No safe level (MDH)
  • Manganese
    Natural manganese; a concern for infants
    100 µg/L for infants (MDH guidance)
  • Fluoride
    Natural fluoride; dental health
    4.0 mg/L (EPA)
  • Uranium
    Natural radionuclide in groundwater
    30 µg/L (EPA)

Petroleum & solvents

Fuel and chemical spills from old tanks or nearby sites.

  • VOCs (volatile organic compounds)
    Fuels, solvents, degreasers and paints
    Varies by compound (EPA)
  • DRO (diesel range organics)
    Diesel and heating-oil petroleum
    No limit of its own; a petroleum screen (MPCA)

Household quality

Staining, scale and taste, and choosing the right treatment.

  • Iron
    Rusty staining and metallic taste
    0.3 mg/L, aesthetic (MDH)
  • Hardness
    Scale buildup; sizing a water softener
    No health standard
  • pH
    Corrosive or scaling water
    6.5 to 8.5, aesthetic (EPA)
  • Sulfate
    Taste and odor; diarrhea risk for infants
    250 mg/L, aesthetic (EPA)

Limits from MDH, EPA and MPCA. Compare your lab results with these values.

Minnetrista private well testing timeline

Minnesota Department of Health schedule: coliform bacteria and nitrate every year, arsenic and lead at least once. Source: MDH
TestYear 1Year 2Year 3Year 4Year 5Year 6
Coliform bacteria
Nitrate
Arsenic
Lead

When to test your water

  • Every yearColiform bacteria and nitrate, the basic safety checks for a private well. Nitrate can come from fertilizer, septic systems and animal waste.
  • At least onceArsenic and lead. Arsenic can differ even between neighboring wells.
  • Before a baby drinks the waterColiform bacteria, nitrate, arsenic, lead and manganese. MDH recommends testing a private well for all five before a baby drinks the water.
  • When you buy a homeA full baseline while you can still ask questions or negotiate.
  • After flooding or well workFlooding and repairs to the well are reasons to test again.
  • When taste, color or smell changesMDH says a change in taste, smell or look is a reason to test for coliform bacteria.
  • Near a fuel tank or industrial siteVOCs, plus DRO for diesel and heating oil. MDH says to consider a VOC test if the well is near fuel tanks or a commercial or industrial area.
  • City water in an older homeLead. MDH says homes built before 1940 may have lead service lines, and plumbing parts made before 1986 may contain lead.

Based on: MDH well testing, MDH coliform bacteria, MDH nitrate, MDH water for babies, MDH flood precautions, MDH lead.

How to get it done

  1. Choose your testsPick the water testing you need in the free instant quote.
  2. Pick a timeBook online. The quote takes about 30 seconds.
  3. Get certified lab resultsA certified laboratory analyzes the water and reports each result.

Get Your Free Instant Quote

Water testing in Minnetrista: what matters

Minnetrista, MN water testing: well cap in the foreground, dairy barn and farmhouse behind it in rural Minnesota in summer
Nitrate: EPA limit 10 mg/L, highest risk to infants →
Well cap in the foreground, hobby farm with horses behind it in rural Minnesota in autumn color (Hennepin County, Minnesota)
Lead: MDH says no level is safe →
Minnetrista, MN water testing: well cap in the foreground, machine shed and farmhouse behind it in rural Minnesota in summer
E. coli: a sign of fecal contamination →

How deep Minnetrista wells go

15 ftsand and gravel (most wells)sandstone and limestone (SE and east central, incl. Twin Cities)1,000+ ft · fractured rock such as granite (NE)
Source: MDH Well Owner's Handbook

Depth and aquifer change what is in the water. Test the well you are buying, not the neighbor's. Get a free instant quote

Arsenic in Minnetrista private wells, out of every 100

About 40 in 100 have some arsenic About 10 in 100 are above the 10 µg/L standard

Source: Minnesota Department of Health

You can't see, smell or taste arsenic. One lab test tells you where the well stands. Get a free instant quote

Questions

Common questions.

Who needs well water testing?
Any home on a private well, and above all when you are buying one. A private well is not regulated like a city water system, so the owner is responsible for knowing what is in the water. Testing before closing tells you whether the water needs treatment while you can still ask questions or negotiate.
What does the water panel cover?
The panel covers coliform bacteria and E. coli, nitrate, arsenic, lead, manganese, VOCs (volatile organic compounds), DRO (diesel range organics), iron, hardness, pH, fluoride, sulfate and uranium. Bacteria and nitrate are the short-term health checks. Arsenic, lead, manganese and uranium are the ones you cannot see or taste. VOCs and DRO screen for solvents and petroleum, such as fuel from an old oil tank or a nearby leak site. Iron, hardness, pH and sulfate explain staining, scale, odor and wear on plumbing and appliances.
How often should a well be tested?
The Minnesota Department of Health recommends coliform bacteria every year, nitrate every year, and arsenic and lead at least once. Test again after flooding, after any work on the well, or if the taste, color or smell of the water changes.
Is well water testing part of the home inspection?
It is an add-on. Add it to your home inspection quote. Testing early in your inspection window leaves time to act on the results.
Do Hennepin County homes with private wells need arsenic testing?
MDH says about 10 percent of Minnesota private wells exceed 10 ug/L arsenic and that it can vary a lot between nearby wells, so it advises testing at least once.
My home is on city water. Is water testing still worth it?
Often yes. Community water systems follow EPA testing rules and report results in an annual Consumer Confidence Report, but that report does not measure your own plumbing. MDH and EPA say lead enters mainly from service lines and plumbing materials, and the only way to know is a tap test. MDH recommends an accredited lab, and your utility can say whether your home has a lead service line.
When should a home be tested for DRO or VOCs?
MDH suggests considering a VOC test when a well is near fuel tanks or a commercial or industrial area. MPCA reports petroleum has leaked at about 22,000 Minnesota sites, including home heating-oil tanks, and releases can threaten drinking water and send vapors into buildings. Reasons to test include a nearby leak site, a former or buried fuel tank, or a fuel odor or sheen. MPCA's leaking-tank-site database shows reported releases.
What should I check on a hobby farm or horse property in Minnetrista?
Minnetrista is largely rural, with corn, soybeans, hay and horses on the land, and its township roots go back to German Home Township in 1858. On a property like that the house is only part of the job. On a house with attached structures, drainage around barns, outbuildings and the house pad, wells and septic systems, wood-framed additions, and moisture in low ground near creeks or wetlands are the things to watch. Six Mile Creek carries runoff from about 17,000 acres to Lake Minnetonka, so water routing across a parcel deserves attention.
How common is arsenic in Minnesota well water?
MDH reports about 10 percent of private wells in Minnesota have arsenic above the 10 µg/L standard, and arsenic was detected in about 40 percent of new wells drilled since 2008. Some wells have reached 350 µg/L. Levels vary between wells, even close together, so each well needs its own test.
How can I reduce lead in my tap water?
Run the tap for at least one minute before drinking or cooking if the water has sat for six hours or more, and use cold water for drinking, cooking, and formula. MDH lists carbon filters certified to remove lead, reverse osmosis, and distillation as treatment options. Replacing lead sources addresses the cause.
How do I find the construction record for my well?
The Minnesota Well Index (MWI), maintained by the Department of Health, is an online database of basic well and boring information that can be searched by map or text. It is the web version of the County Well Index developed with the Minnesota Geological Survey. Most wells built before 1974 will not have records on file. Knowing the construction date helps decide what to test for.
How common is arsenic in Minnesota well water?
The Department of Health says about 40 percent of Minnesota wells have arsenic in the water. It occurs naturally in rocks and soil, levels can differ between wells even within a small area, and you cannot taste, see, or smell it. The EPA limit for community water systems is 10 micrograms per liter. Only a lab test shows the arsenic level in a specific well.
Keep looking

More across Minnesota.

Well Water Testing nearby

Other inspections in Minnetrista

Questions about well water testing

In-depth guides

Free instant quote

Build your quote in 30 seconds.

No phone tag, no callback delay. Price and book your inspection right here — it takes about 30 seconds and there is no obligation.

Free Instant Quote & SchedulerPowered by InspectorData
Free Instant Quote